English
Pусский
Deutsch
Español
日本語
العربية
You are here: Home » News
  • Do you want to minimize power loss by cooling down all the electronics and power devices in your industry? Do you plan on increasing the efficiency of automation controls and large-scale cooling systems?The best part? It's easy with the cold plate!We have tried our best to include all details relate
  • The liquid cold plate is made of copper material whether it is a CPU cold head or a graphics card cold head. As the commonly used aluminum material for heat dissipation, the thermal conductivity is also good, so why does the cold plate heat sink head not use aluminum as the cold head? As one of the
  • Modern electronic liquid cold plates are mainly aluminum alloys, mainly 6 series aluminum alloys. Due to the increasing electronic power density, equipment has higher requirements for reliability, life span, and failure rate during life. In this way, the flow channel structure of the water cold plat
  • The heat dissipation of liquid cold plate is becoming more and more common. For liquid cold plate manufacturers, it is necessary to make an objective judgment on the quality of water cooled cold plate in order to improve the quality of the equipment. Now let the liquid cold plate manufacturer introd
  • Many people think of the heat sinks used in computer CPUs and graphics cards. This is a radiator that only some high-end players can use, because it is more expensive. In the field of industrial electronics, water cold plate or liquid cold plate has also been widely used, but the public does not kno
  • Liquid cold plate cooling project 800W IGBT
  • Designing requirements

    The total thermal power is 3200 w;

    Liquid flow is 0.3 cubic meters per hour;

    The surface temperature of the liquid cold plate is less than 60 ℃;

    Inlet water temperature and ambient temperature are 25 ℃;

    Liquid cold plate

    - Aluminum material

    -Copper tube;

    -Epoxy fills the gaps

    Designing drawing:

  • In high-power products such as large servers, liquid cooling technology is widely used. Liquid cooling technology is to use a liquid with a high specific heat capacity as a heat transfer tool to transfer the heat generated when a high-power product is running, so that the product can operate normall
  • Thermal Solution for 7000W IGBT Cooling ProjectIGBT 550Wx 10PCS=5500W.Other power =1460W.The rate of water flow : 15L/Min, at intake temperature 25℃.Heat sink: AL6063 or AL1060 and FSW process.Environment temperature: 35℃The liquid cold plate surface maximum temperature is below 36℃.

Send a message

Copyright © 2005-2021 Guangdong Winshare Thermal Energy Technology Co., Ltd. All rights reserved