English
Pусский
Deutsch
Español
日本語
العربية

Embedded Tube Cold Plates

We embed copper or stainless steel tubes into an aluminum or copper baseplate, so coolant flows directly beneath the heat source and heat crosses a single tube wall into the liquid. Machining, brazing and helium leak testing all run in our own 60,000 m² Dongguan factory, from first sample to mass production.
Why an embedded tube cold plate:/n/nDirect heat path — coolant runs under the component, with one tube wall between source and liquid.
Low thermal resistance — no interface layer between tube and baseplate.
High flow capacity — the tube carries the full coolant volume with low pressure drop.
Quiet operation — liquid cooling removes heat without fans.
Thin profile — fits enclosures where a finned heatsink will not.
Proven structure — copper or stainless tube in aluminum or copper plate, in production since our 2014 battery cold plate line.

Where Embedded Tube Cold Plates Are Used

New Energy Vehicles

EV battery cold plates, motor controller and inverter cooling — the structure behind our 250,000-vehicle ADAS programme.
 

Industrial Electronics

Inverter and IGBT module cooling, high-power semiconductor bases and laser diode cold plates, built to your heat load and envelope.
 

Data Center and Server

CPU, GPU and memory cooling for AI servers and high-density racks, with stainless tube options for deionized water loops.
 

Medical Devices

Liquid cooling for imaging systems, laser treatment heads and diagnostic electronics, assembled in a 100K-class cleanroom.
 

Aerospace and Military

Avionics and radar cooling where leak-tight integrity and vibration resistance are non-negotiable — 100% helium leak tested per unit.
 

Power Electronics

Cold plates for rectifiers, transformers and power modules, with copper tube and copper baseplate options for high heat flux.
 

Renewable Energy

PV inverter and wind converter cooling — the same cold plate family used in solar stations where we hold over 65% share with Sungrow.
 

LED lighting

Heat spreading for high-power LED arrays and optical modules in compact, sealed housings.
 
 

Why Buyers Choose Winshare as Their Cold Plate Manufacturer

Superior performance

Thermal performance is verified in house — thermal resistance, flow resistance and pressure holding are tested on every design before release.
 

Professional engineering support

Our engineering team returns a cooling-structure proposal with DFM feedback within 24-48 hours of receiving your drawing or heat-load brief.
 

Reliable quality assurance

Certified to IATF 16949, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018, with batch traceability and PPAP documentation for automotive programmes.
 

Cost-effectiveness

Tooling, machining, brazing, assembly and testing stay in one 60,000 m² plant — no outsourced steps, so cost and lead time stay predictable.
 

Trusted Partner

We supply tier-one and industrial customers including Sungrow, Delta and BYD, with 250,000 ADAS cold plates shipped and long-term programme experience.
 
 
 

Winshare Embedded Tube Cold Plates Customization Process

Demand communication and assessment
 
Gain a deep understanding of your cooling needs, application environment, heat load, size constraints, material preferences, and budget.
 
 
Engineering & DFM review
 
Our engineers propose the tube layout, baseplate material and bonding process around your heat load, then flag manufacturability risks before tooling — usually within 24-48 hours.
 
 
Material selection and process determination
 
According to the design and performance requirements, select the appropriate substrate and piping materials and determine the best manufacturing process.
 
 
Prototyping and testing
 
Prototype the cold plate and conduct rigorous performance testing to ensure it meets design specifications.
 
 
 
Design Optimization and Verification
 
We then refine and adjust the prototype based on the test results until we achieve optimal performance and receive your final approval.
 
 
Mass production
 
We use advanced production equipment and strict quality control processes to ensure product consistency and high quality.
 
 

What are the advantages of Embedded Tube Cold Plates?

The tube route and waterway layout are proposed around your heat source position, coolant and envelope, then verified by thermal resistance and leak testing before release.

Direct cooling

Heat source touches coolant path. Lowest thermal resistance

High power ready

Handles 500W+ per plate. Perfect for EV, wind, solar, servers.

Compact size

Fits tight spaces. No big fans needed.
 

Quiet work

No noise. Great for data centers
 

Strong build

Copper brazing, vacuum brazing or press-fit bonding. IATF 16949 & ISO 9001:2015 certified; 100% helium leak tested.

Custom fit

Any tube layout. OEM design
 

Winshare Embedded Tube Cold Plates FAQ

Winshare Thermal Alloy: Liquid cooling expert, driving your innovation with superior quality.

Guangdong Winshare Thermal Technology Co,Ltd. Founded in 2009 focused on high-power cooling solutions for the development, production and technical services, committed to becoming a new energy field thermal management leader for the mission.

CONTACT INFORMATION

Phone: +86-18025912990

ADDRESS

No.2 Yinsong Road,Qingxi Town,Dongguan City, Guangdong Province, China.
No.196/8 Moo 1, Nong Kham Subdistrict, Si Racha District, Chonburi Province.
Copyright © 2009-2026 Guangdong Winshare Thermal Energy Technology Co., Ltd. All rights reserved