Friction stir welding joins aluminum plates below their melting point, producing a solid-state seam without porosity or hot cracking. We machine the flow channels, weld the cover and verify every plate by pressure and helium leak testing in our own 60,000 m² facility — backed by 8 FSW machines (900 × 800 mm) and 300 CNC machines.
Why a friction stir welded cold plate:
Solid-state seam — no melting, so no porosity or hot cracking. Low distortion — flat plates stay in contact with the heat source. Internal channels — flow paths machined to match your heat load. All-aluminum build — light, corrosion-resistant and recyclable. High-strength joint — weld strength approaches the parent alloy. Large-format capability — FSW beds up to 900 × 800 mm.
What material combinations are supported for FSW cold plates?
We friction-stir-weld 6XXX-series aluminum (6061, 6063) for most cold plates, and evaluate aluminum-to-copper joints where conductivity or interface requirements call for it. Send your coolant, temperature range and envelope, and our engineers recommend the material pair before tooling.
Aluminum alloy-aluminum alloy FSW cold plate
FSW is an ideal choice for joining aluminum alloys, particularly those in the 6XXX series, such as 6061 and 6063. It overcomes common defects associated with traditional fusion welding, such as hot cracking and strength loss. Aluminum alloy FSW cold plates offer lightweight, high strength, and excellent thermal conductivity, making them widely used in aerospace, electric vehicles, and high-performance electronic devices.
Dissimilar materials FSW potential
FSW technology also has the ability to join certain dissimilar metals, such as aluminum and copper. While not as common in cold plates as joining similar materials, it shows great potential in specific applications, combining the advantages of different metals.
Our team of engineers has deep knowledge of FSW material science and will evaluate and recommend the most appropriate material combination based on your specific application needs and performance goals, ensuring your cold plate achieves the optimal balance between performance, reliability, and cost-effectiveness.
FSW is cost-effective where plates are large, volumes are high, or weld integrity matters — EV battery packs, energy storage cabinets and industrial power stages. With no filler or flux and an automatable process, unit cost falls as volume grows.
Long-term value from superior performance
Predictable performance — weld strength approaches the parent alloy, and each plate is pressure and helium leak tested before it ships.
High reliability reduces operational risks
Fewer field failures — solid-state seams avoid the porosity and hot cracking of fusion welding, validated by X-ray and ultrasonic inspection.
Production efficiency and automation advantages
Automated production — 8 FSW machines and 300 CNC machines in one plant support repeatable output from prototype to volume.
Material and environmental benefits
No filler, no flux — the solid-state process removes consumables and rework, and the all-aluminum plate stays recyclable.
Reduce total system cost
Design freedom — internal channels follow the heat source, so the plate can replace several separate cooling parts in a compact assembly.
Winshare FSW Cold Plates Advantages and Features
Top FSW technical strength
8 FSW machines with 900 × 800 mm beds, supported by 300 CNC machines — large-format capability and repeatable weld quality in one facility.
Ultimate thermal performance design
FSW achieves smooth, defect-free internal flow channels, minimizing fluid resistance and improving heat transfer efficiency to meet the challenges of high heat flux density.
High reliability and long life
Solid-state connection avoids the defects of traditional welding, and the product demonstrates extremely high reliability and durability under harsh working conditions such as vibration and high pressure.
Lightweight customization experts
We are particularly good at manufacturing aluminum alloy FSW cold plates, providing ideal solutions for applications with strict lightweight requirements such as aerospace and electric vehicles.
Comprehensive quality control system
Quality you can audit — pressure testing, helium leak detection, X-ray and ultrasonic scanning on site, with IATF 16949 and ISO 9001:2015 systems.
Customized engineering support
Engineering support — send a drawing or heat-load brief and our team returns a channel layout and DFM proposal within 24-48 hours, then verifies it on prototype.
Green and environmentally friendly manufacturing
The FSW process is clean and energy-saving, meeting the requirements of modern industry for sustainable development.
Winshare FSW Cold Plates Application Areas
Electric vehicle battery cooling
EV battery packs and motor controller cold plates — large-format aluminum FSW panels built under IATF 16949 for lightweight, leak-tight packs.
Aerospace Electronics
Avionics and satellite electronics — lightweight all-aluminum plates with a solid-state seam that holds up under vibration.
Military radar and communications
Radar and high-power communication modules — flat, high-strength welds that keep the heat source in full contact with the plate.
Industrial Automation
Robot controllers and precision machine tools needing stable temperature control over long duty cycles.
High-power semiconductor cooling
IGBT modules, SiC power stages and laser diode bases — internal channels routed under each heat source.
Data center liquid cooling server
CPU and GPU cold plates for AI servers and high-density racks, with machined channels and flat mounting surfaces.
Renewable energy systems
Wind converters and PV inverters — large-format cold plates for power stages that run continuously in the field.
Medical imaging equipment Medical diagnostic
Medical imaging and diagnostic electronics — FSW cold plates assembled in a 100K-class cleanroom and verified by leak testing.
Winshare FSW Cold Plates Customization Process
In-depth analysis of needs
Get a detailed understanding of your cooling needs, application environment, size constraints, heat loads, and reliability goals.
Channel Layout & DFM Review
Our engineers route the internal channels around your heat sources and flag tooling and weld-access risks before production — usually within 24-48 hours.
FSW process parameter optimization
Precisely set FSW welding parameters based on material and design to ensure weld quality and consistency.
Prototype manufacturing and rigorous testing
Rapidly produce prototypes and perform thermal performance, pressure, flow, helium mass spectrometry leak detection and weld non-destructive testing.
Design iteration and final confirmation
We optimize and adjust based on test feedback until performance reaches its peak and we receive your final approval.
High-standard mass production Utilizing automated FSW
equipment and strict quality control, we ensure high quality and consistency of batch products.
Why choose Winshare FSW Cold Plates?
FSW technology leader
FSW specialists — 8 dedicated machines with 900 × 800 mm beds, and an engineering team that reviews channel layout and DFM before tooling.
Ultimate reliability
Reliability you can verify — every plate is pressure and helium leak tested, with X-ray and ultrasonic inspection available on site.
Customized and innovative designs
Our team of engineers can leverage FSW's flexibility to design and manufacture a cold plate that best meets your specific needs and optimizes performance.
Strict quality control system
From material procurement to FSW welding process, and then to comprehensive non-destructive testing, each link follows the highest standards to ensure zero defects in products.
Environmentally friendly and efficient production
We are committed to green manufacturing, and the cleanliness and energy efficiency of the FSW process reflect our commitment to sustainable development.
Trusted Partner
We are the preferred partner for industry leaders who demand the highest levels of thermal performance and reliability.
Winshare FSW Cold Plates FAQ
Customize your Winshare FSW Cold Plates now and experience superior cooling with solid-state connections!
Guangdong Winshare Thermal Technology Co,Ltd. Founded in 2009 focused on high-power cooling solutions for the development, production and technical services, committed to becoming a new energy field thermal management leader for the mission.