Forced Air Cooling System | Forced Air Heat Sink

Forced air cooling

Forced air cooling is a heat dissipation method that uses increasing air flow as a medium to realize the cooling of heat source parts. By increasing the heat dissipation surface area of the heat source component and accelerating the rate of air flowing through the object per unit time, two methods can quickly achieve good heat dissipation performance. Increasing the heat dissipation area can be achieved by installing a heat sink on the surface of the heat source element. Generally, the heat sink is tightly fixed on the heat source element to obtain higher heat dissipation efficiency. Fans (fans) can be used to increase air flow to enhance ventilation and enhance cooling effects. In most cases, the fan plus the heat sink can greatly improve the cooling efficiency.

Forced air cooling system is often used for cooling and heat dissipation of internal combustion engines. We can see that the exterior of internal combustion engines on cars or motorcycles is not only designed as a toothed plate, but also equipped with a forced air-cooled exhaust port shield. , The design of the toothed sheet is to increase the heat dissipation area, and the fan in the exhaust hood is used to strengthen the air flow on the surface of the internal combustion engine, so that the engine can quickly cool down and ensure normal operation.

Winshare Thermal has strengthened its research and development on the application of forced air cooling in recent years, and realized forced air cooling for heat dissipation of high-power machines such as wind energy converters, photovoltaic inverters, and SVG. The use of high-power shovel-tooth radiator + fan or high-power shovel-tooth radiator + heat pipe can greatly improve the heat dissipation efficiency.

Winshare Thermal offers a variety of air-cooled heat dissipation structure types to choose from

Air cooling + profile radiator
Air cooling + friction welding radiator
Air cooling + insert radiator
Air cooling + shovel radiator
Air cooling + heat pipe radiator

Get Your Instant Quote

Photovoltaic inverter forced air cooling solution

Design input and specification requirements:

Loss term	Single loss(W)	Number of devices	Total loss(W)	model	Ambient temperature(℃)	Heat dissipation design temperature (℃)
IGBT module	426W	1	426W	FS150R12KT3	60	100
total			426W		60	100

Schematic diagram of photovoltaic inverter simulation model and heat dissipation design parameters:

3pcs 6025 fan, the distance from the front panel is 5mm, the corresponding opening rate of the panel is 65%, the aluminum heat sink is adopted, the heat conduction medium: 7762 grease 0.1mm, K=4W/m*K.

Fan instructions and parameters:

(The simulation results show that the original design heat sink + C6025 fan IGBT has a guest temperature of 151°C, the solution matches the NMB6025 fan, and the IGBT guest temperature is 145°C. The two fans have the same speed, noise, voltage, and lifespan, so the NMB fan is the first choice.)

Schematic diagram and data summary of the simulation results of the air-cooled heat dissipation scheme of the photovoltaic inverter:

Data summary:
(1) The plan adopts all-aluminum shovel heat sink + NMB6025ML 7800RPM fan, the shape of the heat sink remains unchanged, the thickness of the bottom plate is unchanged, the thickness of the spur is 0.8mm, a total of 73fins, the spacing: 2.3mm, the shovel aluminum heat sink.
(2) Special attention: there is no gap between the adjustment fan and the front panel to prevent the air from returning. (If there is a 5mm gap according to the original design, the air will flow back and the temperature will increase by 6°C.)
(3) Simulation result: The IGBT case temperature is 94.2℃, which meets the customer's requirement of 100℃.

Guangdong Winshare Thermal Technology Co,Ltd. Founded in 2009 focused on high-power cooling solutions for the development, production and technical services, committed to becoming a new energy field thermal management leader for the mission.

Liquid Cold Plates

Embedded Tube Cold Plates Brazed Cold Plates FSW Cold Plates Die Cast Cold Plates Other

Heat Sink

Skived Fin Heat Sink Extrusion Heat Sink Cold Forged Heat Sink Composited heat sink Components

CONTACT INFORMATION

Phone: +86-18025912990

E-mail: wst01@winsharethermal.com

ADRESS

No.2 Yinsong Road,Qingxi Town,Dongguan City, Guangdong Province, China.

No.196/8 Moo 1, Nong Kham Subdistrict, Si Racha District, Chonburi Province.