-
Q How do Skived Fin Heat Sinks compare to Extruded or Bonded Fin Heat Sinks?
A Skived fins offer higher fin density and superior thermal performance compared to extruded heat sinks, which are limited by die strength and fin tapering. Unlike bonded or brazed fin heat sinks, skived fins are a single, monolithic piece, avoiding the thermal resistance that can arise from solder or adhesive joints, leading to better overall heat transfer efficiency.
-
Q Can you provide design consulting and simulation services?
A Yes, we offer a full range of services, from design concept to finished product delivery. If you're unsure which cold plate solution is best for your application, our team of engineers will provide professional technical consultation and CFD simulation services to help you find the best solution.
-
Q Full traceability and continuous improvement:
A 
We have established a complete product traceability system to ensure the traceability of the entire process from raw materials to finished products. At the same time, adhering to the concept of continuous improvement, we continuously optimize the production process and management process, and are committed to providing customers with better quality and more reliable stamping radiator products. -
Q What is the minimum flow channel diameter for a drilled cold plate?
A The minimum flow channel diameter depends on the material type and the overall size of the cold plate. Winshare has advanced micro-hole drilling technology that can achieve very small flow channel diameters. Please contact our engineers for an estimate of the specific value.
-
Q How is the surface flatness of the FSW cold plate?
A The FSW process can achieve excellent weld surface flatness, which is crucial for close contact between the cold plate and the heat source, helping to maximize heat transfer efficiency.
-
Q Is the maintenance of Embedded Tube Cold Plates complicated?
A Compared to many other cooling methods, maintenance for Embedded Tube Cold Plates is generally simple. This primarily involves regularly checking the coolant's condition and system integrity, and occasionally cleaning to prevent clogging or decreased efficiency. Their robust construction and limited moving parts also reduce the likelihood of mechanical failure.
-
Q Rigorous factory testing
A X-ray Inspection: Non-destructive testing of the inside of die castings to ensure that there are no internal defects such as porosity and shrinkage, Ensuring the internal quality of batch products.
Helium Mass Spectrometry Leak Detection Test: Employing high-precision equipment to ensure that the cold plate seal is defect-free, eliminating any minor leaks, ensuring the airtightness of bulk products.
High Pressure and Burst Testing: Simulates extreme working conditions to verify the structural integrity of cold plates under ultra-high pressures, ensuring safety, and verifying the pressure resistance limit of bulk products.
Dimensional Accuracy and Surface Roughness Testing: Through precision equipment such as coordinate measuring instruments, we ensure that products meet strict dimensional tolerances and surface quality requirements, ensuring the consistency of batch products. -
Q How do vapor chambers improve the reliability of electronic devices?
A The vapor chamber effectively reduces the maximum operating temperature and temperature gradient of the chip by quickly and evenly spreading the heat generated by local hot spots like the chip to a larger heat dissipation area. This reduces thermal stress and delays the aging of components, thereby significantly improving the long-term stability and reliability of electronic devices.
-
Q What materials are typically used for Skived Fin Heat Sinks?
A Predominantly aluminum (e.g., 1060, 1050A, 6063 alloys) or copper (e.g., C1100 alloy). Aluminum is chosen for its lightweight nature, cost-effectiveness, and good thermal conductivity, while copper offers superior thermal conductivity for high-performance applications, despite being heavier and more expensive.
-
Q How does the surface roughness of a drilled cold plate affect performance?
A The surface roughness of the internal flow channel affects the pressure drop and heat transfer efficiency of the fluid. Winshare ensures that the internal flow channel has a good surface finish through precision drilling and post-processing processes to optimize fluid flow and heat transfer performance.
-
Q Does the FSW process have any restrictions on material thickness?
A FSW is suitable for a wide range of material thicknesses, from thin to thick plates. Our equipment and processes are flexible enough to accommodate the manufacturing needs of cold plate of varying thicknesses.
-
Q Does Winshare Thermal Alloy provide installation support or after-sales service?
A Yes, we provide comprehensive after-sales service and necessary technical support. After the product is delivered, if you encounter any problems during installation or use, our technical team will be at your service at any time.
-
Q What is the heat dissipation performance of die-cast cold plates?
A The heat dissipation properties of die cast cold plates are suitable for low to medium to high heat load applications. While its internal runner complexity may not be as complex as that of a brazed fin cold plate, it can still provide an efficient cooling solution with optimized runner design and high thermal conductivity, especially in terms of cost and volume production.
-
Q Our main certifications
A ISO 9001:2015: Internationally recognized quality management system certification, covering the entire product life cycle, ensuring that every step from design to delivery meets the highest standards.
IATF 16949: A quality management system specially developed for the automotive industry, providing the highest level of quality assurance for high-demand fields such as automotive electronics and battery thermal management for new energy vehicles.
ISO 14001:2015: Environmental Management System certification, reflecting our commitment to sustainability and eco-friendly manufacturing, ensuring that the production process meets green standards.
UL / CE / RoHS: Products comply with safety, health and environmental regulations in major markets around the world, ensuring product compliance worldwide. -
Q What customization options are available for Skived Fin Heat Sinks?
A Extensive customization options include precise control over dimensions (e.g., fin height up to 150 mm, length up to 500 mm, fin thickness as thin as 0.2 mm, spacing minimum 0.1 mm). Other options cover material selection, various surface treatments (like anodization, nickel plating, polishing), and integration of mounting solutions such as embedded heat pipes or fan assemblies.
-
Q How long is the production cycle of drilled cold plates?
A : Drilled cold plates typically require longer production cycles due to the high-precision, custom processing involved. This cycle time depends on the complexity of the design, material type, and order volume. We recommend contacting our sales team for a detailed production schedule.
-
Q Does Winshare Thermal Alloy provide installation and after-sales support?
A Yes, we provide comprehensive after-sales service and professional technical support. After the product is delivered, if you encounter any problems during installation or use, our technical team will be at your service at any time to help you.
-
Q Are there any risks of porosity or internal defects in die casting cold plates?
A The die casting process does have potential risks of porosity. However, Winshare is able to minimize or even eliminate internal defects through precise mold design, strict process parameter control, and advanced X-ray inspection technology, ensuring product batch quality and reliability.
-
Q Do you offer low minimum order quantities (MOQ) for custom Skived Fin Heat Sinks?
A Yes, Winshare Thermal often supports low minimum order quantities for custom skived fin heat sinks. This is largely due to the low tooling costs associated with the skiving process, making rapid prototyping and smaller production runs economically viable.
-
Q What is the pressure resistance of the drilled cold plate?
A Because the flow channels are formed directly into the solid metal block, drilled cold plates have extremely high pressure resistance, far exceeding other types of cold plates. This makes them ideal for high-pressure cooling systems and applications with strict safety requirements.
We have established a complete product traceability system to ensure the traceability of the entire process from raw materials to finished products. At the same time, adhering to the concept of continuous improvement, we continuously optimize the production process and management process, and are committed to providing customers with better quality and more reliable stamping radiator products. 
