In practical applications, the ultra-thin heat pipe in the heat pipe heat sink is usually defined as a flat heat pipe with a thickness of less than 2.0 mm. Ultra-thin heat pipes are very thin and can dissipate heat directly to the surface of electronic components, so they are widely used in mobile o Read More

In high-power products such as large servers, liquid cooling technology is widely used. Liquid cooling technology is to use a liquid with a high specific heat capacity as a heat transfer tool to transfer the heat generated when a high-power product is running, so that the product can operate normall Read More

Liquid cooling can significantly increase the thermal conductivity compared to gas cooling. For power electronic devices with high power density, liquid cooling is a good choice. cold plate cooling system use a circulating pump to ensure that the coolant circulates between the heat source and the co Read More

1. The origin and development of heat pipesHeat pipe technology appeared as early as 1942, when Perkins invented and improved the thermosyphon (a simple gravity heat pipe). After 1942, Gaugler proposed the principle of modern heat pipes, but did not apply them in practice. It was not until 1963 that Read More

The general air-cooled heat sink will choose metal as the material of the heat sink. When we choose the heat sink material, we will evaluate it based on high specific heat and high thermal conductivity. Silver and copper are the best thermal conductive materials, followed by gold and silver. . Howev Read More

Heat sink is a heat-conducting metal device that absorbs the heat of high-temperature objects and then disperses it to other places to keep it away from the high-temperature objects. The temperature of the high-temperature objects is stable. The radiator transfers the heat generated by the electroni Read More

The cold forged heat sink is widely used in the heat dissipation of LED lamps and has the following advantages:(1) The price of cold forging die is not high, which can effectively control the cost;(2) High production capacity, suitable for mass production;(3) The mold production cycle is relatively Read More

On March 25, the "Lean Collaboration and Win-Win Future" Sungrow's 2017 Supplier Conference was held in the Shangri-La Hotel, Hefei, Anhui. Dongguan Winshare Hardware Products Co., Ltd. (Winshare Thermal) was rated as an excellent supplier for four consecutive years. Cao Renxian, chairman of Sungrow Read More