Tel: +86-18025912990   |  Email: wst01@winsharethermal.com
Home
cooling plates for electronics
Blog
Share the brilliance of winshare thermal with you for your joint witness
  • Why Do IGBT Modules Require Microchannel Brazed Liquid Cooling?

    2026-03-26

    This technical guide explores why microchannel brazed liquid cooling is the gold standard for high-power electronics. By utilizing vacuum brazing to create a metallurgical bond, these cold plates eliminate the contact resistance found in traditional designs. The article highlights how complex internal microchannels and high-density fins maximize surface area to handle 1000W+ heat fluxes. It also covers the importance of thermal-fluid simulation and helium leak testing in ensuring absolute reliability for IGBT modules in electric vehicles, wind power, and solar inverters. Read More
  • How Vacuum Brazed Cold Plates Prevent Leaks in AI GPU Clusters?

    2026-03-25

    This technical article explains why mechanical seals fail in high-density data centers and how vacuum brazing solves this critical vulnerability. By fusing metal layers into a seamless monolith via a high-temperature metallurgical bond, vacuum brazed cold plates eliminate all physical joints. Validated by strict helium mass spectrometry testing to guarantee absolute zero leakage, these plates safely manage 1000W+ heat fluxes, ensuring maximum uptime for AI GPU clusters, supercomputers, and extreme industrial applications. Read More
  • How to Optimize Tube Layout in an Embedded Tube Cold Plate Design?

    2026-03-25

    This article provides a comprehensive engineering guide to optimizing tube layout in embedded tube cold plate design. It explains how routing strategies—such as serpentine and parallel flow paths—affect thermal performance, pressure drop, and temperature uniformity. The content further analyzes the impact of tube bending on flow resistance, the critical role of tube-to-plate contact quality, and application-specific design approaches for battery systems, IGBT modules, and industrial equipment. By aligning coolant paths with heat sources and controlling interface resistance, engineers can significantly enhance cooling efficiency, prevent thermal hotspots, and extend system lifespan. Read More
  • ​Embedded Tube Cold Plate vs Brazed Cold Plate: Which One Fits Your Application?

    2026-03-24

    This technical analysis explores the critical differences between embedded tube and brazed cold plate technologies in power electronics cooling. It highlights that while embedded tube designs offer a 20%–40% cost reduction and flexible routing for medium heat flux applications like energy storage, brazed cold plates provide a superior metallurgical bond and minimal thermal resistance for high-density IGBT modules. The post guides engineers and procurement managers through a decision-making framework based on thermal conductivity, manufacturing complexity, and weight constraints, concluding with practical validation and testing methods. Read More
  • Mastering Reliability: A Guide To Common Failure Modes in Liquid Cold Plates And How To Prevent Coolant Leakage

    2026-01-20

    Mastering Reliability: A Guide to Common Failure Modes in Liquid Cold Plates and How to Prevent Coolant LeakageThe most common failure modes in liquid cold plates are corrosion, clogging from debris or biological growth, and mechanical failures at seals, fittings, or welds, which frequently result i Read More
  • Custom Cold Plates: A Practical Guide for High-Performance Thermal Management

    2026-01-20

    Custom Cold Plates: A Practical Guide for High-Performance Thermal ManagementA custom cold plate is a specialized liquid cooling device engineered to the exact specifications of a particular application, providing superior thermal management for high-density heat loads where standard off-the-shelf s Read More
  • Why Aluminum Heat Sink Extrusion is the Ideal Solution for Thermal Management

    2026-01-20

    Mastering Reliability: A Guide to Common Failure Modes in Liquid Cold Plates and How to Prevent Coolant LeakageLiquid cold plates are a cornerstone of modern thermal management, but their effectiveness hinges on one critical factor: integrity. The most common failure modes leading to coolant leakage Read More
  • Cold Forged Heat Sinks vs Extruded Heat Sinks – Which Wins in High-Power LED Systems

    2026-01-15

    Cold Forged vs. Extruded Heat Sinks: Which Wins in High-Power LED Systems?When selecting a heat sink for high-power LED systems, cold forged heat sinks are the superior choice for thermal performance and design flexibility, while extruded heat sinks offer a cost-effective solution for lower-power ap Read More
  • Liquid Plate vs. Immersion Cooling: Which Thermal Management Method Wins for BESS Safety?

    2026-01-07

    Liquid Plate vs. Immersion Cooling: Which Thermal Management Method Wins for BESS Safety?When comparing thermal management for Battery Energy Storage Systems (BESS), immersion cooling offers superior safety performance, particularly in preventing thermal runaway, compared to traditional liquid plate Read More
  • Total 38 pages  Go to Page
  • Go
Leave a Message
Send a message
Guangdong Winshare Thermal Technology Co,Ltd. Founded in 2009 focused on high-power cooling solutions for the development, production and technical services, committed to becoming a new energy field thermal management leader for the mission.

Liquid Cold Plates

Heat Sink

CONTACT INFORMATION

Phone: +86-18025912990

ADDRESS

No.2 Yinsong Road,Qingxi Town,Dongguan City, Guangdong Province, China.
No.196/8 Moo 1, Nong Kham Subdistrict, Si Racha District, Chonburi Province.
Copyright © 2009-2026 Guangdong Winshare Thermal Energy Technology Co., Ltd. All rights reserved